Stantest 3.5 Alkyd Enamel

For industrial use and fabrication shop application. It can be used direct to metal or over a primer if more corrosion resistance is required.

Color/Shade code: White/10000 (other colors available) 

Finish: High gloss

Volume solids: 48% ± 1

Theoretical spreading rate: 770 ft²/US gallon [19.2 m²/liter] – 1 mils [25 microns] 

Flash point: 21°F/-6°C 

Specific gravity: 10.4 lbs/US gallon [1.25 kg/liter] 

Viscosity: 14” – 25”, Zahn 3 

Touch dry: 20 minutes, 68°F/20°C 

VOC content: 420 g/liter [3.5 lbs/US gallon]

The physical constants stated are nominal data according to the Hempel Group's approved formulas. VOC may be dependent on color. 

 

Application method: Airless spray / Air spray / Air-assisted airless / HVLP 

Thinner (max. vol.): Airless spray: Apply as packaged.

Nozzle orifice: 0.011" – 0.015" (airless) 

Nozzle pressure: 2,000 psi [131 bar] (Airless spray data are indicative and subject to adjustment) 

Cleaning of tools: Hempel’s Thinner 857US 

Indicated film thickness, dry: 1.0 – 1.5 mils [25 – 38 microns] 

Indicated film thickness, wet: 2.5 – 3.7 mils [60 – 90 microns] 

Overcoat interval, min: 2 – 3 hours, 77°F/25°C 

Overcoat interval, max: See Overcoating

For further Application Details, please refer to the Product Data Sheet available below.

941JB Urethane Cure Agent